 |
The Model 20-HL-E1 Barge has been designed specifically for small pushboats and harbor tugs to save in making up tows.
The winch has a 5 HP motor which results in higher speeds without compromising linepull.
The spring set braking system is capable of holding the 20 ton rated load allowing the operator to attach to the load, tighten and go. The entire winch is designed with only 3 bushings, resulting in reduced maintenance and more up time. |
Performance:
Brake Holding Capacity ............................20 Tons
Rated Continuous Linepull......................6,000 lbs.
Rated Stall Linepull................................16,500 lbs.
Drum Capacity:
5/8".......................................................380 feet
3/4" ......................................................275 feet
7/8" ......................................................194 feet
1"..........................................................132 feet
Dimensions and Weight:
Overall Length ......................................32-1/2"
Overall Width........................................26-1/2"
Overall Height ......................................23-1/2"
Weight with Deck Pivot Pin ................875 lbs.
|
Features:
- High speed operation ideal for Harbor Tug Applications
- 5 Horsepower TEFC Motor and Brake
- 230/460 Volt - 3 Phase - 60 Hz. Power
- Spring Set - Electric release holding brake
- Fully enclosed gearbox with open final gear set
- Machine cut gearing with protective guarding
- Brake release and manual crank for emergency operation
|
