Standard Upright Barge Winch |
|
Standard Features
-
Fully reversing crane and hoist duty motors that are totally enclosed
-
Control from pilot house or deck
-
Stall pulls to 40,000 lbs
-
Improved brake holding capacity to 70,000 lbs
-
Drum guard prevents slack cable from fouling gears
-
Hand wheel for operation in the event of power loss
Optional Features Available
-
Flange mounted ball bearings for power shaft, factory installed
-
Grooved drums
-
Drum flange divider
-
Remote control packages
-
NEMA 1; General purpose enclosure NEMA 4; watertight enclosure
-NEMA 1 or 4 magnetic reversing starter
-NEMA 1 or 4 push button station
|
 |
Electric Low-Profile Barge Winch |
Model
No. |
Capacities |
Holding (lbs) |
Line Speed (fpm) |
Volts,Phase, Cycle |
Weight |
|
Dog Holding Capacities (tons) |
Rated Pull |
Stall* Pull |
Hand Pull |
Electric Brake |
No Load |
Rated Pull |
HP |
Net (lbs) |
Ship (lbs) |
Cu. ft |
301L-RC |
40 |
3,200 |
9,000 |
20,000 |
55,000 |
50 |
42 |
5 |
230/460-3-60 |
728 |
785 |
27.0 |
311L-RC |
40 |
4,200 |
11,500 |
20,000 |
55,000 |
35 |
31 |
5 |
230/460-3-60 |
728 |
785 |
27.0 |
321L-RC |
40 |
4,800 |
13,000 |
20,000 |
55,000 |
50 |
42 |
7.5 |
230/460-3-60 |
859 |
922 |
27.0 |
331L-RC |
40 |
6,400 |
17,500 |
20,000 |
55,000 |
23 |
21 |
5 |
230/460-3-60 |
728 |
791 |
27.0 |
341L-RC |
40 |
6,400 |
17,500 |
20,000 |
55,000 |
35 |
31 |
7.5 |
230/460-3-60 |
859 |
1038 |
27.0 |
351L-RC |
40 |
8,500 |
23,500 |
20,000 |
55,000 |
17 |
15 |
5 |
230/460-3-60 |
728 |
1050 |
27.0 |
601L-RC |
65 |
4,500 |
15,500 |
40,000 |
70,000 |
34 |
30 |
5 |
230/460-3-60 |
1290 |
1536 |
34.0 |
611L-RC |
65 |
6,500 |
22,000 |
40,000 |
70,000 |
34 |
30 |
7.5 |
230/460-3-60 |
1331 |
1536 |
34.0 |
621L-RC |
65 |
8,500 |
28,000 |
40,000 |
70,000 |
17 |
15 |
5 |
230/460-3-60 |
1331 |
1536 |
34.0 |
631L-RC |
65 |
12,000 |
40,000 |
40,000 |
70,000 |
17 |
15 |
7.5 |
230/460-3-60 |
1361 |
1536 |
34.0 |
641L-RC |
65 |
12,000 |
40,000 |
40,000 |
70,000 |
23 |
20 |
10 |
230/460-3-60 |
1361 |
1536 |
34.0 |
Note: All models are shown with "L" designating left hand models; for right hand models, substitute "R" for "L" in model number
Capacities are rated on first layer.
*Stall pull rated at specified voltage with holding dog engaged.
300 Series 40 Ton Std-10" Drum Dia. |
 |
Length (in.) |
Drum Capacity (ft) |
5/8 in. |
3/4 in. |
7/8 in. |
1 in. |
9* |
286 |
196 |
130 |
116 |
17 |
559 |
386 |
258 |
232 |
35 |
1174 |
813 |
546 |
493 |
51 |
1755 |
1216 |
818 |
740 |
69 |
2336 |
1620 |
1090 |
986 |
600 Series 65 Ton Std-14" Drum Dia. |
|
Length (in.) |
Drum Capacity (ft) |
7/8 in. |
1 in. |
1 1/8 in. |
1 1/4 in. |
11* |
210 |
133 |
119 |
67 |
20 |
418 |
265 |
240 |
136 |
41 |
834 |
531 |
481 |
274 |
61 |
1271 |
810 |
734 |
418 |
82 |
1686 |
1075 |
975 |
556 |
|
*Standard length of drum (drum lengths are rounded to nearest inch)
Dimensions are subject to change. Please contact factory for certified prints.
|
