Today is


 
Shur - Worm Gear Series 750 - 3000 lbs. Capacity

Download Acrobat (PDF Viewer)
Print Product Information (Download PDF)
Order Information (Download PDF)

Print Product Manual (W2, 5, 10) (Download PDF)
Print Product Manual (W100-200) (Download PDF)
Winch Check List (Download PDF)

 

Superior Value

Models W100-3P, W100-6P, and W200-5P

Intended for heavy duty hand use or convertible
for intermittent power use
• All the outstanding features of the fully enclosed
     100 series hand models plus:
• Anti-friction ball bearings and internal friction device
     makes models suitable for intermittent power operation
• Unit not furnished with free spooling features


*Drill chuck adapter: 5/8 " nominal diameter shaft, 3/4" drill chuck recommended.

Warning: Before installation see maintenance and operations manual for additional warnings and precautions. This equipment is not to be used for lifting, supporting or transporting people, or lifting or supporting loads over people.

 


Worm Gear design provides automatic self-locking and is mountable in almost any position.

Models W2, W5 , and W10

(Note: W2 & W5 only available in quantities of 50 or more.)

Intended for intermittent hand use; not recommended for power operation
• Open worm gear design
• Ductile iron frames
• Cast iron drums
• Cast steel worm gears
• Steel shafts
• Steel lock-on operating handles
• Optional gear cover

Models W100-3, W100-6, and W200-5

Intended for heavy duty hand use; not recommended for power operation
• Fully enclosed worm gearing
• Steel frames
• Precision machine cut steel worm
• Bronze worm gear
• Free spooling

Worm Gear Series Specifications and Dimensions

Model
Capacity
1st Layer (lbs)
Gear Ratio
Drum Capacities (ft) Ship wt. (lbs) Dimensions (in)
1/8" 3/16" 1/4" 5/16" A B C D
E
W2**
500
25:1
119
54
25
15
18
2
1 1/8
2 3/4
5
3
W5**
750
25:1
327
148
68
42
20
5 1/2
1 1/8
2 3/4
5
3
W10
1850
28:1
980
405
237
146
64
6
2
4
8
4 1/2
W100-3
W100-3P*
1500
20:1
120
60
34
-
21
3
1
2 3/8
4 3/8
2 916
750
W100-6
W100-6P*
1500
20:1
240
120
67
-
22
6
1
2 3/8
4 3/8
2 9/16
750
W200-5
W200-5P*
3000
30:1
560
253
135
96
51
5
1 1/2
4
7
4 1/8
1500

 

Model
Dimensions (in)
F
G
H
I
J
K
L
M
N
O
Q
R
T
W2**
5 1/2
2 3/4
3 7/8
7/8
6 3/4
7 1/2
1/2
7 1/2
12 1/4
8
1/2
1/2
-
W5**
5 1/2
4 1/2
3 7/8
7/8
10 1/4
7 1/2
1/2
11 1/4
12 1/4
8
1/2
1/2
-
W10
8 1/2
5 13/16
5 1/4
1 1/4
13 1/2
10 3/4
3/4
14 1/2
14 5/8
12
13/16
5/8
1/4
W100-3
W100-3P*
4 3/4
1
2 1/2
1/2
3 1/4
5 7/8
3/8
8 7/8
11 1/4
8
1 5/8
2 5/8
3 1/2
W100-6
W100-6P*
4 3/4
2 1/2
2 1/2
1/2
6 1/4
5 7/8
3/8
11 7/8
11 1/4
8
1 5/8
2 5/8
3 1/2
W200-5
W200-5P*
7 1/2
3
4
1/2
6
9 1/4
1/2
12 1/2
15 1/4
12
1 5/8
1 3/4
5

*P Indicates unit may be powered intermittently and is 1/2 of indicated manual rating, motor not supplied. Bolt sizes for: W2, W5, W100 and W200: 3/8"; W10: 1/2" (grade 8)

** Indicates models are only sold in quantities of 50 or more.

Note: Dimensions are subject to change. Please contact factory for certified prints.

 Back to Top

Home | Hand Winches | Barge Winches | Electric Winches | Air Winches
Barge Moving System | Capstans | Custom Winches | Sheaves & Fairleads | Technical Support | Contact Us

5319 Shreveport-Blanchard Highway - Shreveport, LA 71107 - USA - Toll free 888.946.8325 - Fax 318.929.1245

This site is best viewed with your browser set at 800 x 600 or above.
Direct comments or questions about this page to Webmaster